PLATE MOUNTED AXIAL FLOW FANS COMPACT Series type HCFB / HCFT – Range of low profile plate mounted axial fans fitted with plastic impellers(250 to 630) or aluminium hub and plastic blades (710 to 1000). Available, depending upon the model, with single or three phase motors in 2, 4, 6 or 8 poles.

All the motors are IP65 (1), Class F insulation (2), equipped with thermal protection. All motors are speed controllable except 2 pole and /4-630, 4-710, 800, 900, 1000 models.

Electrical supplies: Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).

Three phase 230/400V-50Hz or 400V-50Hz.

(1) 2 pole motor and 800, 900 & 1000 models are IP55.

(2) Working temperatures from -40C up to 70C. Except models 800 to 1000 suitable for usage in environments up to +40C.

Additional Information
Standard air direction: form (A) configuration (Motor over Impeller).

On request:
Air direction:

• form (B) configuration (Impeller over Motor).
• Three phase motors suitable for inverter control (E22 version).
• Inlet finger proof guard for models 800 to 1000. Compact design created by the combination of the motor with
• the factory matched direct drive wrap around impeller hub

Corrosion resistance:

• Mounting plate, motor support and finger proof guard protected by cataforesis primer and black polyester paint finish. Stainless steel screws
• Terminal box Impeller dynamically balanced
• Wiring terminal box with cable gland PG-11
• Impeller dynamically balanced: Impellers are dynamically balanced, according to ISO 1940 standard, giving vibration free operation

Applications:

• Workshops
• Agricultural extract or supply applications
• Greenhouses
• Conditioning groups
• Air conditioning
• Painting Installations
• Warehouses
• Commercial premises
• Car parks

Delta Environmental Ltd © 2015

Home/Contact | Reverse Jet Filters | Shaker Filters/Collectors | Filter Spares & Consumables | Fans–Industrial | Fans & Controllers for Agricultural | Sitemap